探索映像文件

These images are built using Install OpenEmbedded.

Be sure to use the kernel and u-boot from this page, not the ones from the factory image. As always, backup your sd card before replacing it with these images, or better yet, use a new micro SD card.

Boot files:

• http://dl.dropbox.com/u/14618236/MLO
• http://dl.dropbox.com/u/14618236/u-boot.bin-for-2.6.38
• http://dl.dropbox.com/u/14618236/uImage-2.6.38-r0-usrp-e1xx.bin
• http://dl.dropbox.com/u/14618236/modules-2.6.38-r0-usrp-e1xx.tgz (Only needed if you are using an image not built with the 2.6.38 modules)

Image tarballs:

• http://dl.dropbox.com/u/14618236/console-e1xx-devel-image-usrp-e1xx.tar.gz (compilers, UHD, dsplink, and dsplink-examples) [bitbake console-e1xx-devel-image]
• http://dl.dropbox.com/u/14618236/gnome-gnuradio-image-usrp-e1xx.tar.gz (Updated version of the image that ships with the E100)
• http://dl.dropbox.com/u/14618236/console-openbts-devel-image-usrp-e1xx.tar.gz Image with packages that support OpenBTS. See http://gnuradio.org/redmine/projects/gnuradio/wiki/OpenBTSE100 for instructions on running OpenBTS

SD Card images:

• http://dl.dropbox.com/u/14618236/qt.bin.gz QT with GLES, gnuradio-companion with QT GUI. (Not buildable with OE)

References:

• http://www.gumstix.org/create-a-bootable-microsd-card.html